To join a reputable organization with vigor and professional attitude for personal professional growth and for the betterment of the organization and to accept all the challenges against my abilities and perform my duties with honesty and affectionately.
· Working as Assistant Manager Electrical (Maintenance) in confidential organization.
· Develops and maintains maintenance management schedule, job information cards, by evaluating technical manuals of the equipment.
· Develop preventive maintenance procedures by using software like integrated logistics support (ILS), integrated configuration and supportability management software (ICSM), Establish maintenance management software (EMMS).
· Prepare material support documents (MSD).
· Evaluation of technical documentation for procurement and approval of equipment.
· Perform FMEA, FMECA and RCMA of the equipments.
Working as a Electrical Engineer Operation and Maintenance of Rolling Mill.
Operation and maintenance of PLC S7 300 and troubleshooting if needed.
Maintenance and operation of DC Drives and VFDs .
Operation and maintenance of Proximity sensors ,level switches ,Solenoid valves.
Communicate regularly with operators and plant maintenance to research, identify and correct problems. Make necessary changes for improvements.
Work directly with Operators, Maintenance and Electrical Technicians to troubleshoot and repair production machinery as needed. Must be available to work as needed, sometimes with little notice
Work with Managers and Operators to ensure efficient operation of equipment, identify and address process and preventative maintenance improvements
Provide engineering solutions to management to ensure full process capability and offer suggestions for continuous improvements and capital improvements
Work with the production teams to support the maintenance program
Worked as an Electrical Engineer at Grid station and Power House in AGHA STEEL Industries.
Responsible for the operation and maintenance of 132/33 KV and 132/6 KV Grid station and 33 kv GIS System.
Responsible for the maintenance and operation of 33 KV capacitor bank. Responsible for the operation of generators according to the plant load.
Responsible for continuous electrical supply to main areas of plant by synchronizing the self generation with K-Electric power supply, coupling and de-coupling the feeders or by operating the generator on island mode.
Preparation of daily load consumption log sheets, Gas consumption sheets, Generators stoppage reports and Daily check lists.
Responsible for the availability of parts and material for maintenance.Good knowledge of ERP.
Working experience as an Lead Electromechanical Technician (Foreman) in Imdaad company Dubai.
• Maintenance and operation of scada system.
• Maintenance and operation of Larger capacity centrifugal pumps.
• Maintenance and operation of different kinds of three phase and single phase motors.
• Maintenance and operation of different kinds of plcs like omron, siemens etc.
• Maintenance and operation of different kinds of Vfds like ABB and Danfoss etc.
• Installation and maintenance of Electrical Panels.
• Installation, maintenance and operation of different kinds of motor starters like soft starters ,smart motor controllers SMC3, DOL and star delta etc.
• Maintenance and operation of larger capacity diesel generators.
• Maintenance and operation of conveyor belts.
• Maintenance and operation of Dewa ACBs, LV feeders, switchgears and capacitor banks.
• Maintenance and operation of booster pump room, adjust and maintenance of pressure switches for sweet water supply.
• Installation of PRV, gate valves and float switches.
• Maintenance and operation of sewage treatment plant ,sewage lifting station, transfer pumping stations and irrigation pumping station.
• Maintenance and operation of plc panels and LV switchgears.
• Maintenance of all kind of MEP works.
Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
• Connect and terminate wires to circuit breakers, Generators, transformers, or other components with four piece stainless steel (SS) and brass gland.
• Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
• Advise management on whether continued operation of equipment could be hazardous.
• Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as multimeter and magger, to ensure compatibility and safety of system.
• Load testing and phase sequence test of Generators.
• Install ground leads and connect power cables to equipment, such as motors.
• Repair or replace wiring, equipment, and fixtures, using hand tools and power tools.
• Work from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment, and fixtures by following all the safety rules and regulations.
• Construct and fabricate parts, using hand tools and specifications.
• Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
• Consult with engineers, engineering technicians, line installers, repairers and maintenance workers when performing installations.
• Direct and train workers to install, maintain, or repair electrical wiring or equipment.
One year working Experience as a Junior Engineer (Design) in KAD CONSULTANTS, Hyderabad. (Electrical Building design on Auto Cad, Internal & External electrification, Air-conditioning System, Voice & Data System including Estimation, BOQs and Tender documents).
• Prepare and execute the best suitable electrical design of building by briefly viewing the civil design and purpose of the area of building.
• Execute plans of electrical wiring for well functioning lighting, consumer units, distribution boards and other electrical systems.
• Prepare and evaluate the drawings, total estimate, total bill of quantity (BOQ), Tender documents planning and Designing of projects with in limited time.
• Co-ordinate with client and contractor for execution of project activities.
• Prepare and maintain record of quotations and list of approved material of complete equipments for the project.
• Responsible for submission and approval of design/data of building/material and miscellaneous design from client and contractor.
• Maintain and update record on project control document.
• Two Years working experience as an Electrical Engineer (Operation & Maintenance) in POWER CEMENT INDUSTRIES, Nooriabad.
• Troubleshooting, operation and maintenance of DCS & PLC system.
• Maintenance and operation of different kind of panels DOL starters, Star Delta Circuits, Reverse forward circuits, switchgears and other circuits.
• Maintenance and operation of motor up to 2850 kW.
• Maintenance of MCCs and LV feeders.
• Maintenance and Operation of different kind of VFDs (Inverters).
• Quality Control Plant Maintenance, Maintenance Planning, Execution, Preventive/ Predictive maintenance.
• Develop maintenance and testing procedures for electrical components and equipment.
• Plan and develop applications and modifications for electrical and electronic properties used in parts and systems to improve technical performance.
• Bill calculation and monthly energy audit.
• Continuously maintain the power factor and voltage level at the plant.
• Maintenance and operation of Generator up to 2500 MVA.
• Working knowledge of sensor RTD\'s like PT-100, thermocouples, level sensors, pressure switches, differential pressure switches, and pressure transmitters.
• Initiate & execute plans for the reactive and preventive maintenance to ensure the smooth operations.
• Day to day maintenance and supervision activities for the electrical system.
• Daily checklist checking and maintaining proper documents of department.
• Provide preliminary sketches and cost estimates for materials and services.
• Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
• Investigate complaints from other department and workers, evaluate problems, and recommend solutions.
• Maintenance and operation of plant substation and switchgears like power transformers 132/11 kv and 11/6.6 kv , maintenance and operation of C.T, P.T and insulators.